Z3X pro Easy Jtag BOOT repair Samsung Galaxy SIII Verizon SCH-i535 Successfully Un-bricked
Connection with MOORC Jpin isp adapter :
Z3x Easy Jtag suite v1.7.0.2 interface (easy repair)
LOG report after five attempts:
Initialising: SAMSUNG SCH-I535 Config
ver.:1.00
I/O Level set to : 2200 mV
Box S/N: 0E00F0129BB9EAE7 ,FW Ver.: 01.51
Connecting to Target...
Done with error(s *** first time ***)...
Z3X EasyJtag Software ver. 1.7.0.2
Loading eMMC Addon Firmware... IO: 2850 mV
Box S/N: 0E00F0129BB9EAE7, ,FW Ver.: 01.51
CMD Pullup Level:1051 mV
CMD Active Level:1206 mV
Can't init EMMC, Reason: CMD Timeout Error
===================================
Done *** second time ***.
Z3X EasyJtag Software ver. 1.7.0.2
Loading eMMC Addon Firmware... IO: 2850 mV
Box S/N: 0E00F0129BB9EAE7, ,FW Ver.: 01.51
CMD Pullup Level:1247 mV
CMD Active Level:1454 mV
Can't init EMMC, Reason: CMD Timeout Error
===================================
Done *** third time ***.
Z3X EasyJtag Software ver. 1.7.0.2
Loading eMMC Addon Firmware... IO: 2850 mV
Box S/N: 0E00F0129BB9EAE7, ,FW Ver.: 01.51
CMD Pullup Level:1722 mV
CMD Active Level:2062 mV
Can't init EMMC, Reason: CMD Timeout Error
===================================
Done *** forth time ***.
Using EasyRepair Mode...
Checking repair data...
EasyJtag Suite ver.: 1.7.0.2 / wxWidgets
3.1.0-W-U started.
Operating system ver.: Windows 7 (build
7601, Service Pack 1), 64-
For support and updates visit
http://easy-jtag.com
Check security...OK
Initialising: SAMSUNG SCH-I535 Config
ver.:1.00
I/O Level set to : 2200 mV
Box S/N: 0E00F0129BB9EAE7 ,FW Ver.: 01.51
Connecting to Target...
JTAG device: MSM8960.
CPU IDCODE : 0x4F1F0F0F Mfg.: 0x787, Part:
0xf1f0, Ver.: 0x4
CPU Manufacturer: Samsung , CPU Name:
ARM7GEN
JTAG device: MSM8960.
CPU IDCODE : 0x706B10E1 Mfg.: 0x070, Part:
0x06b1, Ver.: 0x7
CPU Manufacturer: QUALCOMM , CPU Name:
MSM8960 Rev 0.3
Halting CPU...
Initialize hardware...
Starting target communication...
Detecting emmc memory parameters of bank (0)
...
EMMC #0 : ID : 0x00000015 Name : MAG4FB
Size : 14.7 G , (30777344) Blocks
EMMC #1 : ID : 0x00000015 Name : MAG4FB
Size : 2.0 M , (4096) Blocks
eMMC flash device(s) found, Device ID :
0x00150000
NAND Writing GPT...
Packet length too large: 0xFFFFFFFF
Unknown DCC answer /PROTOCOL/
Failed writing file GPT.BIN to eMMC flash 0
at offset 0x000B0000
*** BATTARY WAS LOW ***
Using EasyRepair Mode...
Checking repair data...
EasyJtag Suite ver.: 1.7.0.2 / wxWidgets
3.1.0-W-U started.
Operating system ver.: Windows 7 (build
7601, Service Pack 1), 64-
For support and updates visit
http://easy-jtag.com
Check security...OK
Initialising: SAMSUNG SCH-I535 Config
ver.:1.00
I/O Level set to : 2200 mV
Box S/N: 0E00F0129BB9EAE7 ,FW Ver.: 01.51
Connecting to Target...
JTAG device: MSM8960.
CPU IDCODE : 0x4F1F0F0F Mfg.: 0x787, Part:
0xf1f0, Ver.: 0x4
CPU Manufacturer: Samsung , CPU Name:
ARM7GEN
JTAG device: MSM8960.
CPU IDCODE : 0x706B10E1 Mfg.: 0x070, Part:
0x06b1, Ver.: 0x7
CPU Manufacturer: QUALCOMM , CPU Name:
MSM8960 Rev 0.3
Halting CPU...
Initialize hardware...
Starting target communication...
Detecting emmc memory
parameters of bank (0) ...
EMMC #0 : ID : 0x00000015 Name
: MAG4FB Size : 14.7 G , (30777344) Blocks
EMMC #1 : ID : 0x00000015 Name
: MAG4FB Size : 2.0 M , (4096) Blocks
eMMC flash device(s) found,
Device ID : 0x00150000
NAND Writing GPT...
eMMC Write OK! Elapsed time:
32.287846s (126.859 KiB/s)
NAND Writing SBL1...
eMMC Write OK! Elapsed time:
1.220070s (104.912 KiB/s)
NAND Writing SBL2...
eMMC Write OK! Elapsed time:
2.139122s (119.675 KiB/s)
NAND Writing SBL3...
eMMC Write OK! Elapsed time:
4.834276s (105.910 KiB/s)
NAND Writing ABOOT...
eMMC Write OK! Elapsed time:
19.986700s (102.468 KiB/s)
NAND Writing RPM...
eMMC Write OK! Elapsed time:
3.120006s (164.102 KiB/s)
NAND Writing TZ...
eMMC Write OK! Elapsed time:
3.759606s (136.184 KiB/s)
All Done.
No comments:
Post a Comment